Buy High Lifter Products PLK800R-50

High Lifter Products

HIGH LIFTER PLK800R-50 HI-LIFTER LIFT KIT POLARIS (KIT) Listing ID: 1221641Manufacturer Part Number: PLK800R-50Reference Part Number(s): 434-0060, 434-0166 Out Of StockBrand New

Product Information Bigger. Badder. BOLDER. Take your ATV to the edge with High Lifter’s 3” Signature Series Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 15 years perfecting the ultimate ATV lift kit. The product? An easy-to-install, bolt-on lift thatconsistently measures truer over competitor products. The High Lifter 3” Lift Kit relocates the shock mounts to provide additional lift making room for larger tires and tightens suspension. Each Lift Kit part is precision cut and zinc plated for durability and reliability in anyenvironment. This kit contains alignment cones for 10mm bolts for use with factory tie rod/rod ends and OEM bolts If you have upgraded or plan to upgrade to our Pro Series Tie Rod/Rack End kit, see notes below. 3” Lift Kit Features: - All hardware needed for successful installation - User-friendly instructions - Bolt-on application; takes approximately 1-2 hours for install - Zinc plated - Front and rear lift - Clear-coated High Lifter name plate Attributes Note 3” Signature series lift kit estimated install time for experienced mechanic: 2hr. NOTE: fts full size models only!!! NOTE: 1.5” Spacers are recommended, but a minimum of a 1” wheel spacer is required on the front if you are running 12” diameter factory or aftermarket wheels for the wheel to clear the tie rod with the alignment cones installed. If you are running wide tires a 1.5” Or wider spacer may be required depending on the width of the tire for tire to shock clearance at full lock steering. NOTE: if you have upgraded or plan to upgrade to our pro series tie rod/rack end kit you will need our part# (psak-1) alignment cone kit for 1/2” diameter bolts. Our psak-1 alignment kit comes with 2- alignment cones and all of the hardware required to upgrade both sides of your ranger and is used to help correct your tie rod angles. NOTE: be sure to ask if the customer has our high lifter forward a-arm kit that now includes our psak-1 alignment cone kit for 1/2” bolts. If they do they can install our hd ranger tie rod kit with no additional purchases. NOTE: new aftermarket heavy duty cv axles are recommended for the 2011-2014 ranger before installing any brand of lift kit. The 2011- 2014 model rangers have lighter duty rear axles than previous year models and are more prone to breakage. All customers should be aware of these risks before installing a lift kit on a 2011-2014 ranger, as high lifter will not warranty or replace any broken cv axles. NOTE: 1.5” Spacers are recommended, but a minimum of a 1” wheel spacer is required on the front if you are running 12” diameter factory or aftermarket wheels for the wheel to clear the tie rod with the alignment cones installed. If you are running wide tires a 1.5” Or wider spacer may be required depending on the width of the tire for tire to shock clearance at full lock steering. Quantity KIT